Primary size

• To: tesla-at-pupman-dot-com
• Subject: Primary size
• From: Michael Tucknott <Michael.Tucknott-at-virgin-dot-net> (by way of Terry Fritz <twf-at-verinet-dot-com>)
• Date: Tue, 06 Apr 1999 12:04:28 -0600
• Approved: twf-at-verinet-dot-com

Hi all

Can somebody tell me the relationship between secondary
size(Inductance/capacitance)
and the primary coil.
I plan too build a flat spiral on a moveable base(so I can adjust the
coupling)it
will be built from 0.25" copper tube with 0.25" space between turn.
The dia of the inside turn will be 11" or so.

Now the first coil I built had 10 turns but was taped at 4.75 turns so
were
the extra outside turns unnecessary.

I want to keep the coil foot print as small as possible.

Thank in advance Mike Tucknott


****************************************************************************
*********
If at first you don`t succeed......

It must be someone else`s fault so
Find them; Blame them; Make them pay

http://freespace.virgin-dot-net/michael.tucknott/tesla.html
****************************************************************************
**********

• Prev: (Fwd) transformer
• Next: Re: re:flash tubes
• Index(es):
  • Main
  • Thread