coil size for orbits? (fwd)

• To: "'Tesla List'" <tesla-at-pupman-dot-com>
• Subject: coil size for orbits? (fwd)
• From: Tesla List <tesla-at-stic-dot-net>
• Date: Tue, 20 Jan 1998 19:17:41 -0600
• Approved: tesla-at-stic-dot-net

From: 	D.C. Cox[SMTP:DR.RESONANCE-at-next-wave-dot-net]
Sent: 	Tuesday, January 20, 1998 12:35 PM
To: 	Tesla List
Subject: 	Re: coil size for orbits? (fwd)

to: Jim

.005 MFD, sec. coil of 2 in dia PVC x 9 inch winding length #26 ga., a two
gap fixed sparkgap with small 100 cfm blower fan.  Sec. termination of 3/4
inch x 3.5 inch dia. toroid (machine from solid alum) --- will produce
sparks around 5-6 inches long.

DR.RESONANCE-at-next-wave-dot-net
> 
> 
> ---------- Forwarded message ----------
> Date: Mon, 19 Jan 1998 18:26:19 EST
> From: Homer Lea <HomerLea-at-aol-dot-com>
> To: tesla-at-pupman-dot-com
> Subject: coil size for orbits?
> 
> i have just obtained a pile of 10kv 240va orbits. can someone suggest a
good
> size coil, cap, torroid, etc for a jr. coil from one or two of these.
> 
> jim heagy

• Prev: 7000V/700mA ??
• Next: RQ Gap (fwd)
• Index(es):
  • Main
  • Thread