[Prev][Next][Index][Thread]
Re: Voltage/Length (fwd)
---------- Forwarded message ----------
Date: Mon, 19 Jan 1998 19:21:53 -0500
From: "Robert W. Stephens" <rwstephens-at-headwaters-dot-com>
To: Tesla List <tesla-at-pupman-dot-com>
Subject: Re: Voltage/Length (fwd)
> Date: Mon, 19 Jan 1998 12:26:49 -0700 (MST)
> To: tesla-at-pupman-dot-com
> Subject: Re: Voltage/Length (fwd)
> From: Tesla List <tesla-at-pupman-dot-com>
>
>
> ---------- Forwarded message ----------
> Date: Mon, 19 Jan 1998 19:17:09 +0000
> From: "John H. Couture" <couturejh-at-worldnet.att-dot-net>
> To: Tesla List <tesla-at-pupman-dot-com>
> Subject: Re: Voltage/Length (fwd)
John Couture wrote:
> Jeff, All -
> These tables are based on spark conditions and
> using apparatus that is very different compared to Tesla coils. For this
> reason these tables cannot be used for Tesla coils.
<snip>
> Also, the equation is based on benchmarks that have
> been used by coilers in the past, such as 60 inches represents one million
> volts for Tesla coils.
<snip>
John,
In my own experimental experience the distance benchmark you give of 60 inches
for 1 Megavolt is not accurate for a Tesla coil discharge. The actual terminal
voltage required for such a distance feat is, in my own experience, considerably
less than 1 Megavolt. Although there are at least two examples of so-called
professional suppliers of commercial Tesla coils for sale out there who employ
similar claims in their own advertising, actual laboratory measurements
would surely more-often-than-not show such marketing claims as highly
exagerated.
Greg Leyh has, as I understand actually measured the output terminal
voltage of his older 45 kW Tesla coil as no more than some 500kV
while producing streamers between 20-30 feet in length (if memory and
attention serve me correct). His finding follows my own measurements
albeit at somewhat reduced streamer lengths and input power levels to
his own very impressive achievements.
I am in the process of constructing a HV capacitive divider column
probe to be able to measure both peak voltage and waveform shape on
Tesla coil outputs up to either 500 kV or 1 MVolts (haven't decided
how tall to make this sucker yet as one will be an inside capable
tower, the other only outside capable given my present state of the
lab).
John if you err on this fundamental variability (and this particular
parameter appears slippery in the present state-of-the-art), and employ it as a
"hard reference" in any of your software, your output data may not
mimic reality at the level of accuracy implied. You may wish to avoid making
hard claims in "spark length VS voltage for Tesla coils" until more
is known through actual physical measurement by researchers working
in this field.
Greg, would you like to share your own measurement experience again with
this list?
Always searching for the truth,
Robert W. Stephens
Director
Lindsay Scientific Co.
RR1 Shelburne, ON Canada L0N-1S5
Tel: 1-519-925-1771 Fax:
*Custom built Tesla coils, etc., for museum display
and special effects work.
*Canada's largest publicly accessible wall-to-wall
indoor lightning show...by appointment.
*Future home of Electric Science World,
educational/entertaining Theatre of Electricity.
~~~~~~~~~~~~~ Inquiries welcomed! ~~~~~~~~~~~~~~~