Dc Supply for Mark Part 2

• To: tesla-at-pupman-dot-com
• Subject: Dc Supply for Mark Part 2
• From: RWB355-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Date: Fri, 25 Sep 1998 17:30:52 -0600
• Approved: terryf-at-verinet-dot-com

Hi, Mark, All,

I forgot about the third possibility.

If you use a 3 phase rectifier, you would connect the cold end of all
transformers together and run each hot leg to one pole of the three phase
rectifier. In this case the center tap would remain unused, also. If you were
to connect these together you would be shorting out one half of each NST.


Coiler greets from germany,
Reinhard

• Prev: Re: HV wiring
• Next: dielectric material
• Index(es):
  • Main
  • Thread