frequency

• To: tesla-at-pupman-dot-com
• Subject: frequency
• From: Cabbott Sanders <cabbott-at-cyberis-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Date: Tue, 08 Sep 1998 06:53:24 -0600
• Approved: terryf-at-verinet-dot-com

>  Is there something critical about using those particular frequencies?
> A higher frequency would result in a smaller form requirement.
> Another way would to use lexan strips arranged in any desired
> diameter pattern (ala-Tesla's extra coil frame) this would also reduce
> form losses.
>
> Jim McVey

Jim, if i hope to be running at 15 kw, i might as well go with a lower
frequency, bigger secondary.  after all, how am i gonna fit 1000 turns of
#10 on a tiny pipe? I've also heard that little coils just wont hold up to
the higher power levels.  any feedback on this anyone?


--
Cabbott Sanders
Salem Oregon
Website: http://members.aol-dot-com/cabbotttt
Phone 503-390-8992
Cel   503-930-9173

• Prev: Re: Pigs and X-Ray Cabling
• Next: A little humility would go a long way
• Index(es):
  • Main
  • Thread