RE: spark gap ?

• To: tesla-at-pupman-dot-com
• Subject: RE: spark gap ?
• From: "Thornton, Russ #CSR2000" <ThorntoR-at-rc.pafb.af.mil> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Date: Thu, 03 Sep 1998 06:33:16 -0600
• Approved: terryf-at-verinet-dot-com

Chris,
Is the total of the multigaps still 5mm?

Russ Thornton
CSR 2040, 
Building 989, Rm.  A1-N20
Phone: (407) 494-6430 
Email: thorntor-at-rc.pafb.af.mil


> ----------
> From: 	Tesla List[SMTP:tesla-at-pupman-dot-com]
> Sent: 	Wednesday, September 02, 1998 7:49 PM
> To: 	tesla-at-pupman-dot-com
> Subject: 	spark gap ?
> 
> Original Poster: "chris.swinson" <chris.swinson-at-zetnet.co.uk> 
> 
> Hi all,
> 
> My first coil used a single gap which was set to about 5mm.  I later
> changed
> to a multi gap, all gaps are 1mm appart using copper tubes ( RQ type).
> This
> improved my coil no end, It must have gave about 50% increase in output.
> 
> What I want to know is, if I half the gaps to say, 1/2mm, and use twice as
> much tubes, will this increase power again ?
> 
> 
> All the beST,
> Chris.
> 
> chris.swinson-at-zetnet.co.uk
> www.users.globalnet.co.uk/~mega01/    <--- moved site to...
> www.users.zetnet.co.uk/mega.disczine/
> 
> 
> 
> 
> 
> 
> 

• Prev: Re: Spark Gap Gasses Experiment
• Next: Re: Any Very High Freq. TCs?
• Index(es):
  • Main
  • Thread