[Prev][Next][Index][Thread]

chokes-new question




----------
From:  Mark S Graalman [SMTP:wb8jkr-at-juno-dot-com]
Sent:  Saturday, May 30, 1998 8:00 AM
To:  tesla-at-pupman-dot-com
Subject:  Re: chokes-new question

  Put the resistors in series with the choke coil
in between the choke coil and the bypass to ground.
Beings they 25 watt resistors, I'd use the 1.5 K
resistors.

Mark Graalman


On Fri, 29 May 1998 23:24:15 -0500 Tesla List <tesla-at-pupman-dot-com> writes:
>
>----------
>From:  Mad Coiler [SMTP:tesla_coiler-at-hotmail-dot-com]
>Sent:  Friday, May 29, 1998 5:58 PM
>To:  tesla-at-pupman-dot-com
>Subject:  Re: chokes-new question
>
>All of you using resistors with you lowpass circuit: where do you put 
>the resistors? Say for example I have safety gap, capacitors accoss 
>the 
>gap and inductors off each terminal of the gap going to the TC primary 
>
>wires. Were do the resistors come in? I have been running my TC with 
>the 
>bypass caps, and with the caps & chokes, but dont have any R yet.  I 
>do 
>have four 3k ohm 25W resistors, is 3k or 1.5K usable for this?
>
>Tristan Stewart
>
>
>
>

_____________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno-dot-com
Or call Juno at (800) 654-JUNO [654-5866]