Electroplating

• To: "'Tesla List'" <tesla-at-pupman-dot-com>
• Subject: Electroplating
• From: Tesla List <tesla-at-stic-dot-net>
• Date: Wed, 19 Aug 1998 23:31:34 -0500
• Approved: tesla-at-stic-dot-net

----------
From:  Harri Suomalainen [SMTP:haba-at-cc.hut.fi]
Sent:  Wednesday, August 19, 1998 12:05 PM
To:  tesla-at-pupman-dot-com
Subject:  Re: Electroplating

>  If there is anyone on the list that has a chemistry background I would
>like to know what concentration of silver nitrate you would need for
>this process. There are many different concentrations listed at Fisher
>Scientifics website.

Take the cheapest one available in crystalline form. Dilute it with water
to get a suitable solution. Liquids are very expensive and some of the
grades you listed was a reference standard. (Would probably have
cost you at least 1000 time the money a commercial toroid costs
to use that one :) Technical grade is ok for the job.

List archives may have some info for you. I think about 6-12 month
back there was a lot of talk about electroplating.


--
Harri Suomalainen     mailto:haba-at-cc.hut.fi

We have phone numbers, why'd we need IP-numbers? - a person in a bus

• Prev: Pre-assemled coils
• Next: Pre-assemled coils
• Index(es):
  • Main
  • Thread