[Prev][Next][Index][Thread]

Electrodes




----------
From:  Brad McPeak [SMTP:bmcpeak-at-gte-dot-net]
Sent:  Thursday, August 13, 1998 4:22 AM
To:  Tesla List
Subject:  Fw: coil


Brad McPeak
---------------------------------------
mailto:bmcpeak-at-gte-dot-net
Please Visit our Web Site
Mcpeak's Garage Sale
http://home1.gte-dot-net/bmcpeak/index.htm
---------------------------------------
-----Original Message-----
From: Chip Atkinson <chip-at-pupman-dot-com>
To: Brad McPeak <bmcpeak-at-gte-dot-net>
Date: Sunday, July 12, 1998 11:06 PM
Subject: Re: coil


>Brad,
>
>Here's what I found:
>
>&gt; Tungsten face on steel slug spark gap electrodes
>The Miller (welding supplies/parts) part numbers are:
>095 621 base       $3.50     porcelain, each one holds 2 gaps
>020 622 point holder $8.52   Al, 4/base, cooling fins all around
>020 603 HF point   $3.25     steel slug w/ tungsten face, 4/base
>Prices are for each piece, avail as an assembly. &lt;Mark Napier&gt;
>
>Chip
>
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> Chip Atkinson
> http://www.pupman-dot-com
> --- If I can't fix it, I can fix it so it can't be fixed --
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
>
>On Sun, 12 Jul 1998, Brad McPeak wrote:
>
>> Chip,
>> Thanks for your help.
>> Brad McPeak
>> ---------------------------------------
>> mailto:bmcpeak-at-gte-dot-net
>> Please Visit our Web Site
>> Mcpeak's Garage Sale
>> http://home1.gte-dot-net/bmcpeak/index.htm
>> ---------------------------------------
>> -----Original Message-----
>> From: Chip Atkinson <chip-at-pupman-dot-com>
>> To: Brad McPeak <bmcpeak-at-gte-dot-net>
>> Date: Sunday, July 12, 1998 11:51 AM
>> Subject: Re: coil
>>
>>
>> >Brad,
>> >
>> >Go ahead and ask about the induction coil.  There's also the HV list
if
>> >you are familiar with that.
>> >
>> >I don't know the part number for the TIG points, but I'll look some
more.
>> >My search "engine" both sucks and is broken on my web site now.  I'm
>> >looking at replacing it with either a newer version or another one.
I'll
>> >look into it this evening though.
>> >
>> >Chip
>> >
>>
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
>> > Chip Atkinson
>> > http://www.pupman-dot-com
>> > --- If I can't fix it, I can fix it so it can't be fixed --
>>
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
>> >
>> >On Sun, 12 Jul 1998, Brad McPeak wrote:
>> >
>> >> Chip,
>> >> I would like to ask if you would mind if I mentioned an Induction
coil
>> that
>> >> Dad wants to sell. also I did not get much response to the questions
>> below
>> >> could you answer them? Thanks.
>> >>
>> >> > Hello,
>> >> > I would like ask a couple of questions. First, it appears Jerry
Gore's
>> >> > "Tesla Coil Madness" page has moved again. Does anyone know the
new
>> URL?
>> >> > And second someone had on their home page part numbers and
pictures of
>> >> the
>> >> > "Miller TIG Points. Could someone supply me with this info? Thanks
in
>> >> > advance.
>> >>
>> >>
>> >>
>> >>
>> >> Brad McPeak
>> >> ---------------------------------------
>> >> mailto:bmcpeak-at-gte-dot-net
>> >> Please Visit our Web Site
>> >> Mcpeak's Garage Sale
>> >> http://home1.gte-dot-net/bmcpeak/index.htm
>> >> ---------------------------------------
>> >>
>> >
>>
>