Secondary coil diameter

• To: "'Tesla List'" <tesla-at-pupman-dot-com>
• Subject: Secondary coil diameter
• From: Tesla List <tesla-at-stic-dot-net>
• Date: Mon, 10 Aug 1998 19:04:19 -0500
• Approved: tesla-at-stic-dot-net

----------
From:  Michael Tucknott [SMTP:Michael.Tucknott-at-virgin-dot-net]
Sent:  Monday, August 03, 1998 12:31 AM
To:  Tesla List
Subject:  Re: Secondary coil diameter

Tesla List wrote:
> 
> ----------
> From:  Gottfrid Svartholm [SMTP:wargen-at-hem1.passagen.se]
> Sent:  Sunday, July 05, 1998 5:12 PM
> To:  tesla-at-pupman-dot-com
> Subject:  Secondary coil diameter
> 
> Which secondary coil diameter would be the best to run from a 8kV/45ma
> neon?
> I'm using salt water caps, and can easily make more to get optimum
> capacitance
> for the sec. coil.
> 
> //Gottfrid

Hi Gottfrid 
The coil myself and Dr B built usues a 10Kv 50mA OBIT
and is wound on pipe with an OD of 4.25" the lenght is 22"
and the coil has hit 26" discharge.
And we use the good old S/W caps.   

Cheers Mike Tucknott

• Prev: Output Voltage vs. Firing Rate (fwd)
• Next: synchronous motor for a rotory gap
• Index(es):
  • Main
  • Thread