Re: The GE Xray caps....-> Fair Radio Sales caps (fwd)

To: tesla-at-pupman-dot-com
Subject: Re: The GE Xray caps....-> Fair Radio Sales caps (fwd)
From: Tesla List <mod1-at-pupman-dot-com>
Date: Fri, 7 Aug 1998 20:59:23 -0600 (MDT)
Approved: mod1-at-pupman-dot-com



---------- Forwarded message ----------
Date: Fri, 7 Aug 1998 12:18:48 -0500
From: Shaun <shaunobrien-at-geocities-dot-com>
To: Tesla List <tesla-at-pupman-dot-com>
Subject: Re: The GE Xray caps....-> Fair Radio Sales caps (fwd)

>---------- Forwarded message ----------
>Date: Wed, 5 Aug 1998 22:29:58 -0500 (CDT)
>From: Larry Bud Melman <gasman-at-althea.a-line-dot-net>
>To: Tesla List <tesla-at-pupman-dot-com>
>Subject: Re: The GE Xray caps....-> Fair Radio Sales caps (fwd)
>
>> >    In a Fair Radio Sales flyer I got they had .01=uF 100Kvdc caps from
>> >goverment surplus. Could these be used for tesla service like rating them
>> >for 50Kvac? They are 5" X 10" X 2.5" and have 1" #12 studs on either end.
>> 
>> I use one of these.  With a 15KV/60mA NST, I get 42" sparks.  The cap does
>> get slightly warm in spots after a 30-60 second run, so I'm careful to limit
>> the run times.  I've tried hard but have been unable to learn anything more
>> about the nature of these caps.  Anyone else?
>> 
>> Gary Lau
>> Waltham, MA USA
>
> Where can I contact Fair Radio??
>
> How much are these caps??
>
> (even though I need at least 5, it might be economical, if you know
>what I mean....)

    You can reach Fair radio from their site http://alpha.wcoil-dot-com/~fairadio/
These caps are $100 each.