Re: valve diode tubes ? (fwd)

To: tesla-at-pupman-dot-com
Subject: Re: valve diode tubes ? (fwd)
From: Tesla List <mod1-at-pupman-dot-com>
Date: Fri, 7 Aug 1998 20:58:52 -0600 (MDT)
Approved: mod1-at-pupman-dot-com



---------- Forwarded message ----------
Date: Fri, 7 Aug 1998 17:52:57 +0100
From: "chris.swinson" <chris.swinson-at-zetnet.co.uk>
To: Tesla List <tesla-at-pupman-dot-com>
Subject: Re: valve diode tubes ? (fwd)


-----Original Message-----
From: Tesla List <tesla-at-pupman-dot-com>
To: tesla-at-pupman-dot-com <tesla-at-pupman-dot-com>
Date: 07 August 1998 05:03
Subject: Re: valve diode tubes ? (fwd)


>
>
>---------- Forwarded message ----------
>Date: Thu, 06 Aug 1998 19:17:24 -0700
>From: Ed Phillips <evp-at-pacbell-dot-net>
>Reply-To: ed-at-alumni.caltech.edu
>To: Tesla List <tesla-at-pupman-dot-com>
>Subject: Re: valve diode tubes ? (fwd)
>
>"I'm after a diode or valve that will handle 240 watts min, thats at 8Kv
>-at-30
>ma.  This must be the minimum spec."
>
> Do you mean a tube that will rectify 8 kv and pass a current of 30
>ma???  There are (or at least should be) lots available for peanuts.
>The big cost will be the insulated filament transformer.
>

Well my neon is 8Kv at 30ma ( 240 watts ), so the valves will have to rated
at about 12Kv at about 50ma, for my DC.


>Ed
>
>