[Prev][Next][Index][Thread]
Re: coil form sealing (fwd) : using valspar heavy build epoxy finish (fwd)
-
To: tesla-at-pupman-dot-com
-
Subject: Re: coil form sealing (fwd) : using valspar heavy build epoxy finish (fwd)
-
From: Tesla List <mod1-at-pupman-dot-com>
-
Date: Sun, 26 Apr 1998 21:14:44 -0600 (MDT)
-
Approved: mod1-at-pupman-dot-com
---------- Forwarded message ----------
Date: Sat, 25 Apr 1998 23:46:29 EDT
From: ESchulz531 <ESchulz531-at-aol-dot-com>
To: tesla-at-pupman-dot-com
Subject: Re: coil form sealing (fwd) : using valspar heavy build epoxy finish
Kevin,
I used it and it works just fine. Since you already have it I would go ahead
and use it. Don't worry about the bubbles very much because most of them will
pop. The bubbles also lower the capacitance a little. :)
Hope this helps.
Erik
http://members.aol-dot-com/tesla00