Re: Capacitor check (fwd)

To: tesla-at-pupman-dot-com
Subject: Re: Capacitor check (fwd)
From: Tesla List <mod1-at-pupman-dot-com>
Date: Fri, 24 Apr 1998 08:36:11 -0600 (MDT)
Approved: mod1-at-pupman-dot-com



---------- Forwarded message ----------
Date: Fri, 24 Apr 1998 14:46:24 MYT
From: Sulaiman Abdullah <sulabd-at-hotmail-dot-com>
To: tesla-at-pupman-dot-com
Subject: Re: Capacitor check (fwd)




>Hi Sulaiman,
<snip>
>             I think you might be headed for grief if you try and 
>pack your voltage ratings into a single unit.
<snip>

>My advice: build four of 4x the required value, match them well and 
>run them in series. A shunt resistance with appropriate voltage 
>rating and a value which permits a least as much current as you get 
>leakage in a single cap to flow should ensure voltages are roughly 
>equal across each cap. Best of luck.
>
>Malcolm
>
I agree in theory, the problem is I'd bought the PE ages ago
before I'd received an education here!
Given that I'm going to use the already cut PE anyway could you
give me your advice, thanks. ... Sulaiman


______________________________________________________
Get Your Private, Free Email at http://www.hotmail-dot-com