[Prev][Next][Index][Thread]
Re: feed thru insulators (fwd)
---------- Forwarded message ----------
Date: Thu, 23 Apr 1998 22:55:15 -0600
From: "D.C. Cox" <DR.RESONANCE-at-next-wave-dot-net>
To: Tesla List <tesla-at-pupman-dot-com>
Subject: Re: feed thru insulators (fwd)
to: Kevin
Try either Fair Radio Surplus Sales in Lima, OH, or C&H Surplus Sales in
Pasadena, CA.
DR.RESONANCE-at-next-wave-dot-net
----------
> From: Tesla List <tesla-at-pupman-dot-com>
> To: tesla-at-pupman-dot-com
> Subject: feed thru insulators (fwd)
> Date: Wednesday, April 22, 1998 11:09 PM
>
>
>
> ---------- Forwarded message ----------
> Date: Tue, 21 Apr 1998 15:48:48 -0400
> From: Kevin Wahila <kevinw-at-stny.lrun-dot-com>
> To: tesla-at-pupman-dot-com
> Subject: feed thru insulators
>
> i unpotted my neons and am gathering materials to construct new housings.
> so far i only have some .25" plexiglass (lucite) i plan on using plastic
> L-bar and nylon nuts&bolts along with acrylic cement to secure the lucite
> pieces together. so far that seems to be no problem to me. but i am
> having a problem finding feed-thru insulators for the HV output. the
only
> place i found that sells them is Daburn, but they don't sell them in
> quantities less than 10. I've seen them at the nebraska surplus web
site,
> but they are too large. i was looking in the range of 1-2". where can i
> get these from? if i can't, are there any other comparable methods?
>
> thanks, kevin
>
>