[Prev][Next][Index][Thread]
how much power for an 8" secondary?
----------
From: Jeff Corr [SMTP:corr-at-enid-dot-com]
Sent: Tuesday, April 14, 1998 7:39 PM
To: tesla-2 list; tesla list
Subject: how much power for an 8" secondary?
Well I was gonna just build a 6" with #22
instead of #24... but someone mentioned an 8"
so I must ask, heh...
I used 3 15kv/30ma neons, and I have two .01256uf
caps each rated at 25kv and 30kv. (homemade
rolled poly)
Can 15kv, 90ma be enough to run an 8" diameter coil,
and what gauge of wire would I need, and how long
should I wind it?
If using a 1/4 scale, it should be 8"x32" correct?
Jeff Corr
2114 Monitor
Enid, OK 73703
http://www.harvestcomm-dot-net/personal/corr/