40 mil LDPE and 5kv Transformers?

• To: "'Tesla List'" <tesla-at-pupman-dot-com>
• Subject: 40 mil LDPE and 5kv Transformers?
• From: Tesla List <tesla-at-stic-dot-net>
• Date: Fri, 10 Apr 1998 23:19:41 -0500
• Approved: tesla-at-stic-dot-net

----------
From:  Alan Sharp [SMTP:AlanSharp-at-compuserve-dot-com]
Sent:  Friday, April 10, 1998 5:20 AM
To:  INTERNET:tesla-at-pupman-dot-com
Subject:  40 mil LDPE and 5kv Transformers?

Josh wrote:
>My cap is .12uf and at full
>power (140v) variac input to the H&R's with 6 series gaps, the pipes need
>to be set just less than an eigth of an inch apart.  Don't let this bother
>you, the H&R trannies really perform despite what has been said about
them.
>My coil produces 5' sparks and runs at 77kHz.<

Josh whats the spec of your coil, I ask because I use a similar transformer
output.

Alan Sharp (UK)

The first UK Teslathon will take place on.
Saturday 30th May, 11am,Corby, Northamptonshire.

My web site:
http://ourworld-dot-compuserve-dot-com/hom Approved: tesla-at-stic-dot-net
epages/AlanSharp
UK Teslathon details, soild state coiling, conventional
coiling, UK component sources.....

• Prev: DIY Ball Lightning
• Next: induction heater
• Index(es):
  • Main
  • Thread