Help with Custom Cap thoughts??

• To: "'Tesla List'" <tesla-at-pupman-dot-com>
• Subject: Help with Custom Cap thoughts??
• From: Tesla List <tesla-at-stic-dot-net>
• Date: Sun, 5 Apr 1998 08:54:03 -0500
• Approved: tesla-at-stic-dot-net

----------
From:  Alan Sharp [SMTP:AlanSharp-at-compuserve-dot-com]
Sent:  Saturday, April 04, 1998 8:18 AM
To:  INTERNET:tesla-at-pupman-dot-com
Subject:  Help with Custom Cap thoughts??

DJ wrote:

>The material is called ALPOLIC.  It is maybe a 3/16" thick piece of
>polyethylene sheet with perhaps a 1/16" thick sheet of aluminum bonded to
>each side.  It comes in 4' x 8' sheets and you can use wood working
>equipment to cut it, etc.

I was interested because it sounds like instant HV capacitor - about
0.024uf
per sheet.

I found a web site with details of this material,
but I couldn't find a UK distributor.

http://www.alpolic-dot-com/html/alpolic_hub.htm

Have fun,

Alan Sharp (UK)

• Prev: McMaster Carr Mica Sheets
• Next: smooth sphere vs unsmooth sphere
• Index(es):
  • Main
  • Thread