[Prev][Next][Index][Thread]

neon rewind




From: 	Peter Electric[SMTP:elekessy-at-macquarie.matra-dot-com.au]
Reply To: 	elekessy-at-macquarie.matra-dot-com.au
Sent: 	Wednesday, September 24, 1997 6:06 AM
To: 	Tesla List
Subject: 	Re: Primary Qs

Tesla List wrote:

> From:   Malcolm Watts[SMTP:MALCOLM-at-directorate.wnp.ac.nz]
> Sent:   Monday, September 22, 1997 2:49 PM
> To:     tesla-at-pupman-dot-com
> Subject:        Re: Primary Qs
>
> HI John,
>           I'm not losing too much sleep over the one transformer I
> have lost since I learnt a lot from the exercise and the plan now is
> to wind a 2kW model using the same core.
>

 Malcolm,

I unpotted a dud 15kV 30Ma neon recently and the thicness of the
secondary wire was thinner than the average hair! I couldn't see how you
could re-wind one without using much thicker wire and either making the
secondaries physically much wider, in which case you wouldn't have room
for the shunts, or having less turns which would give you lower voltage.

In any case, good trannies are not so common here in Aus so keep us
posted on how you go with your project.

Cheers,

Peter E.