Re: Secondary voltage measurement.

• To: "'Tesla List'" <tesla-at-poodle.pupman-dot-com>
• Subject: Re: Secondary voltage measurement.
• From: Tesla List <tesla-at-stic-dot-net>
• Date: Sat, 20 Sep 1997 23:18:19 -0500
• Approved: tesla-at-stic-dot-net

From: 	Greg Leyh[SMTP:lod-at-pacbell-dot-net]
Sent: 	Saturday, September 20, 1997 3:07 PM
To: 	Tesla List
Subject: 	Re: Secondary voltage measurement.

DR.RESONANCE wrote:


> A spark discharge of nine feet from a medium to large size TC with good
> design parameters represents a potential difference of 1 million volts (1
> MEV).  On the system we conducted the original measurements many years ago
> the primary cap was .05 MFD, power level 6.5 kva, and sec. coil was 20 inch
> dia with a 30 x 7 inch toroid.  Hope this gives you an approximate
> reference.

How did you come up with the 1 MV value?


-GL

• Prev: FW: Late introduction
• Next: stacked plate capacitor
• Index(es):
  • Main
  • Thread