Re: Adhesive for PE

• To: "'Tesla List'" <tesla-at-poodle.pupman-dot-com>
• Subject: Re: Adhesive for PE
• From: Tesla List <tesla-at-stic-dot-net>
• Date: Thu, 18 Sep 1997 07:22:27 -0500
• Approved: tesla-at-stic-dot-net

From: 	NTesla[SMTP:ntesla-at-ntesla.csd.sc.edu]
Sent: 	Thursday, September 18, 1997 3:48 AM
To: 	tesla-at-pupman-dot-com
Subject: 	Re: Adhesive for PE

>From: 	Sulaiman Abdullah[SMTP:sulabd-at-hotmail-dot-com]
>Sent: 	Wednesday, September 17, 1997 8:56 PM
>To: 	tesla-at-pupman-dot-com
>Subject: 	Re: Adhesive for PE
>
>
>
>Kevin, thanks for the idea , I'll try it.  Bye ... Sulaiman
>
>>Sulaiman.
>>
>>It's not easy, especially if it's under oil.
>>The only substance I found to work well is pure silicone rubber,
>>not the kind with additives such as acrylic.
>>Silicone will bind softly with poly,
>>it can be removed with a razor blade.
>>
>>Kevin E.

If I remember right, posted a while back was a recipe for making a castable
insulation compound involving paraffin and polyethylene. Apparently one can
dissolve polyethylene shavings in hot paraffin and gain a quite servicable
castable plastic. I would think that this compund, when hot, would weld
polyethylene instantly. Comments?

Dan

• Prev: My homepage
• Next: Re: Glass/poly and more...
• Index(es):
  • Main
  • Thread