Re: New Testing

• To: "'Tesla List'" <tesla-at-poodle.pupman-dot-com>
• Subject: Re: New Testing
• From: Tesla List <tesla-at-stic-dot-net>
• Date: Tue, 16 Sep 1997 17:26:16 -0500
• Approved: tesla-at-stic-dot-net

From: 	Esondrmn-at-aol-dot-com[SMTP:Esondrmn-at-aol-dot-com]
Sent: 	Tuesday, September 16, 1997 7:24 AM
To: 	tesla-at-pupman-dot-com
Subject: 	Re: New Testing

In a message dated 97-09-16 01:27:08 EDT, you write:

<< 
 Another possible consideration --- are your high freq RF filter chokes
 mounted under your primary coil (or within a few feet)?  If so they will
 pick up a high potential RF signal that could blow some components.  We
 also learned this lesson the hard way many years ago.  Now we mount all of
 our "filter" components in a separate HV power supply box that is usually
 10-15 feet away from the oscillator base itself.
 
 DR.RESONANCE-at-next-wave-dot-net
 
  >>
Thanks for the info.  My HV RF chokes are on the filter board with the safety
gap, maybe 25 feet from the coil.  The 120 v and 240 v line filters are on
the low voltage control board maybe 30 feet from the coil.

Ed Sonderman

• Prev: Re: rolled caps [Oil source ? ]
• Next: Re: Measuring k
• Index(es):
  • Main
  • Thread