[Prev][Next][Index][Thread]
RE: brass spheres
From: RODERICK MAXWELL[SMTP:tank-at-magnolia-dot-net]
Reply To: tank-at-magnolia-dot-net
Sent: Tuesday, September 02, 1997 8:48 PM
To: Tesla List
Subject: Re: brass spheres
Tesla List wrote:
>
> From: Malcolm Watts[SMTP:MALCOLM-at-directorate.wnp.ac.nz]
> Sent: Tuesday, September 02, 1997 12:42 AM
> To: tesla-at-pupman-dot-com
> Subject: Re: brass spheres
>
> Hi Roderick,
>
> > From: RODERICK MAXWELL[SMTP:tank-at-magnolia-dot-net]
> > Reply To: tank-at-magnolia-dot-net
> > Sent: Monday, September 01, 1997 7:28 PM
> > To: tesla-at-pupman-dot-com
> > Subject: brass spheres
> >
> > Any of you list members remember a post several months ago by Fr. Tom
> > about a company that sells brass spheres in various diameters? I want to
> > use a small one on a high freq. coil that I am building. It's a small
> > coil that resonates at about .90-1Mhz. And I don't want to use a toroid.
>
> I bought a child's skittle set which included two 3" hard plastic
> balls and covered the balls with pieces of Al foil using contact
> adhesive for the mini coils. Worked well, and even better by rolling
> the balls around on a flat surface after the foil was applied to
> smooth out the ridges. I gave the skittles away :) The finger grips
> in the balls were filled with hot-melt first.
>
> Malcolm
Thanks Malcolm, but I want this little coil to look real pretty!
Frankensteins Helper
Max