[Prev][Next][Index][Thread]

Where do I find POLYETHYLENE 30-60mil thick, for caps?




From: 	Adam[SMTP:absmith-at-tiac-dot-net]
Sent: 	Sunday, October 26, 1997 5:13 PM
To: 	tesla list
Subject: 	Where do I find POLYETHYLENE 30-60mil thick, for caps?


I went to Home Depot today, to search for materials to make the Burt Pool 
type caps, and polyethylene sheets, as described, were not available.  
Where should I go for these 4x8x30mil sheets.  I am thinking of using 
30mil (if avail) three layers deep, for a total of 90mil.  My coil will 
be fed with 12-15kV from parallel'd neons or a pig.

Also unavailable was the thin non-sch40 PVC tubing 6" in dia.  I must 
keep looking for that.

Last item: Mineral oil.  I estimate needing about 5gal for all three 
caps.  I need a source for the pure stuff in the Boston area.  Any 
suggestions on what *type* of place I need to look? Is there a 
'materials' FAQ for this group? I just signed on, and did not receive any 
FAQs- its unusual for a listserv to not send one as the first message.

Thanks in advance,

Adam




--------------------------------------------------------------------------
Adam Smith
absmith-at-tiac-dot-net
Epoch, Inc. Digital Music Project

www.tiac-dot-net/users/absmith/     Now with MP3!     Musik. Macht. Macintosh.
--------------------------------------------------------------------------