Re: Newbie question

• To: tesla-at-pupman-dot-com
• Subject: Re: Newbie question
• From: Tesla List <mod1-at-pupman-dot-com>
• Date: Tue, 14 Oct 1997 21:32:00 -0600 (MDT)
• Approved: mod1-at-poodle.pupman-dot-com

---------- Forwarded message ----------
Date: Tue, 14 Oct 1997 21:15:12 -0400 (EDT)
From: student_of_agoshtas <ceg4760m-at-cs.wright.edu>
To: Tesla List <tesla-at-pupman-dot-com>
Subject: Re: Newbie question 

> 
> To: Aric
> 
> If using enameled magnet type wire use Dolph's AC-43 enamel.  It goes on
> easily, air dries fast, can also be baked if desired, and provides good
> turn to turn cementing.  We use 7 or 8 coats on all our coils.  Keep
> rotation on for first 30 minutes of drying and then just let them set.  A
> good magnet wire to use is any 105 degree C. wire such as Beldon
> Polythermalize.
> 
> DR.RESONANCE-at-next-wave-dot-net
> 

Thanks for the advice.  Can you recommend a source for the Dolph's?

Aric

• Prev: Re: Newbie question
• Next: Re: Non-Linear Coil Winding Experiment. (and more tests!)
• Index(es):
  • Main
  • Thread