Re: Input/Output Power

• To: tesla-at-pupman-dot-com
• Subject: Re: Input/Output Power
• From: Tesla List <mod1-at-pupman-dot-com>
• Date: Sat, 4 Oct 1997 14:26:55 -0600 (MDT)
• Approved: mod1-at-poodle.pupman-dot-com

---------- Forwarded message ----------
Date: Sat, 4 Oct 1997 08:22:53 -0500 (CDT)
From: Richard Wayne Wall <rwall-at-ix-dot-netcom-dot-com>
To: Tesla List <tesla-at-pupman-dot-com>
Subject: Re: Input/Output Power 

Scott wrote: 

snip

>The fluke measured 165mv!  This equates to over 60 amps at 250VAC.  I 
>only have 30 amp breakers on this line.  Is the reading wrong, or is 
>the breaker too slow, or not good for this application????

snip

Put a scope across the current shunt and compare current waveform and 
phase with the 250VAC main.  I have also scoped a current shunt in the 
base ground of a conventional TC.

RWW 

• Prev: Transformers, Grounding, Cable questions.
• Next: Magnifier
• Index(es):
  • Main
  • Thread