[Prev][Next][Index][Thread]

Re: how to spin metal




From: 	D.C. Cox[SMTP:DR.RESONANCE-at-next-wave-dot-net]
Sent: 	Saturday, November 29, 1997 7:50 PM
To: 	Tesla List
Subject: 	Re: how to spin metal

to: Bill

Unless you are a true glutton for self punishment --- don't try your own
spinning.  It makes about as much sense as trying to build your own tires
for your car.  Experience speaks here -- we picked up a spinning machine
and spent nearly 7 months perfecting the technique --- and it's far from
perfect at this time.  After spinning there is the the precision welding
required and the final sanding.  It is very very difficult and is probably
hands down the hardest thing to try to do if you are a self coil builder. 
Makes caps isn't easy either but its childs play compared to spinning,
sanding, grinding, and welding to make an acceptable toroid.

DR.RESONANCE-at-next-wave-dot-net


----------
> From: Tesla List <tesla-at-pupman-dot-com>
> To: 'Tesla List' <tesla-at-poodle.pupman-dot-com>
> Subject: Re: how to spin metal
> Date: Friday, November 28, 1997 4:27 PM
> 
> 
> From: 	Bill Noble[SMTP:william_b_noble-at-email.msn-dot-com]
> Reply To: 	Bill Noble
> Sent: 	Friday, November 28, 1997 12:09 PM
> To: 	Tesla List
> Subject: 	Re: how to spin metal
> 
> also, check with a company called Skinned Knuckles - they publish a
magazine
> for car restorers that carries a book on metal spinning - if you can't
find
> the address, let me know and I'll look it up.
> 
> >
> >From: Jim Lux[SMTP:jimlux-at-earthlink-dot-net]
> >Sent: Sunday, November 23, 1997 12:40 PM
> >To: Tesla List
> >Subject: how to spin metal
> >
> >
> >> Can someone post the details on how  spun metal toroids, or spheres,
> >> are made? Or give me directions on how to find out?
> >
> >Lindsay publications has a book on it.
> >
> >
> >
> >
> 
> 
> 
> 
>