[Prev][Next][Index][Thread]
Re: Plasma, IS IT FLAMMABLE (fwd)
From: Chip Atkinson [SMTP:chip-at-XiG-dot-com]
Sent: Tuesday, November 11, 1997 1:49 PM
To: esmit-at-ilink.nis.za
Subject: Re: Plasma, IS IT FLAMMABLE (fwd)
Greetings,
Plasma fires are something only seen on Star Trek. However, more to the
point -- Topics such as this are best investigated first and discussed
second. The reason is that, regardless of what you are doing or your
intentions, these topics attract the wrong kind of discussion from other
people. In particular, the pseudo scientific mumbo-jumbo that is the
territory of con-men and snake oil sellers, as well as people who don't
know the difference between wishes and reality.
The USA-Tesla list has been poisoned by this type of discussion.
Originally it was an excellent source of information. Last I heard, the
perpetual motion, zero point energy folks had taken over and the amount of
noise vastly exceeded the signal level.
That being said, my advice is to go ahead and try your theory, experiment
and the post the results. Let the rest of the people in the list examine
these results and see what they say. Tell people about how you set up the
experiment so that they can reproduce your experiement and verify your
results. One of the main differences between science and magic/deceit is
that the former is open with techniques and results, while the latter is
closed and unwilling to show what's "behind the curtain".
Chip
---------------------------------------------------------------
Chip Atkinson; Xi Graphics 1801 Broadway, Denver CO 80202
(303)298-7478voice (303)298-1406fax (800)946-7433sales
---------------------------------------------------------------
---------- Forwarded message ----------
Date: Mon, 10 Nov 1997 22:15:57 -0600
From: Tesla List <tesla-at-pupman-dot-com>
To: 'Tesla List' <tesla-at-poodle.pupman-dot-com>
Subject: Re: Plasma, IS IT FLAMMABLE
Resent-Date: Mon, 10 Nov 1997 21:41:52 -0700
Resent-From: tesla-at-pupman-dot-com
From: esmit-at-ilink.nis.za[SMTP:esmit-at-ilink.nis.za]
Sent: Monday, November 10, 1997 1:30 PM
To: tesla-at-pupman-dot-com
Subject: Plasma, IS IT FLAMMABLE
Hi,
Long time no write.
I have a question.
I want to build a "plasma gate" a theory i have about a kind of
dimensional/black hole that can be created through plasma. I just want to
know if i use say neon/Helium or whatever, is it flammable. Will it burst
into flames if i put my TC into the gas.
I really want to experiment and test my theory with plasma. I want to put
the gas(helium) into a long glass tube and are afraid that the gas might
explode and glass will hit me.
How does a person get so a great vaccuum in the glass tube?
say if i use helium, and put it at 1 mm Hg(whatever that is) and make plasma
what is its effect against a tube filled with helium at .001 mm Hg pressure?
Do i need a strong magnet to affect the plasma?
any comments?
Thanks
Richard Smit