Re: Homemade stacked plate cap. Need a vacuum pump?

To: "'Tesla List'" <tesla-at-poodle.pupman-dot-com>
Subject: Re: Homemade stacked plate cap. *Need* a vacuum pump?
From: Tesla List <tesla-at-stic-dot-net>
Date: Mon, 3 Nov 1997 07:38:27 -0600
Approved: tesla-at-stic-dot-net

From: 	DamDeName-at-aol-dot-com[SMTP:DamDeName-at-aol-dot-com]
Sent: 	Sunday, November 02, 1997 9:14 PM
To: 	tesla-at-pupman-dot-com
Subject: 	Re: Homemade stacked plate cap.  *Need* a vacuum pump?

Hi Alfred,

     Just a  thought here----
A speaker cannot take near it's rated power 
with a sinewave input --- 
     I don't know the safety margin -- but 
you will let the smoke out of a speaker *quickly*
thata-way .
  best,
           Sandy

In a message dated 97-11-03 00:53:34 EST, you write:

 From: 	Alfred A. Skrocki[SMTP:alfred.skrocki-at-cybernetworking-dot-com]
 Sent: 	Sunday, November 02, 1997 1:20 AM
 To: 	Tesla List
 Subject: 	Re: Homemade stacked plate cap.  *Need* a vacuum pump?
 
 A simple way to eliminate bubbles without a vacuum pump is to mount the 
 capacitor on it's side and then put it on a vibrator to shake the bubbles 
 to the surface. BTW a 12 inch or bigger speaker driven at 50 watts or 
 more from a signal generator feeding an amplifier with 50 to 400 hz. 
 works great!
 
                                Sincerely
 
                                 \\\|///
                               \\  ~ ~  //
                                (  -at- -at-  )
                         -----o00o-(_)-o00o-----
                            Alfred A. Skrocki
                    Alfred.Skrocki-at-CyberNetworking-dot-com
                              .ooo0   0ooo.
                         -----(   )---(   )-----
                               \ (     ) /
                                \_)   (_/
 			       
 
 
 
 
 
 ----------------------- Headers --------------------------------
 Return-Path: <tesla-request-at-pupman-dot-com>
 Received: from  mrin57.mail.aol-dot-com (mrin57.mail.aol-dot-com [152.163.116.95])
by air12.mail.aol-dot-com (v36.0) with SMTP; Mon, 03 Nov 1997 00:53:34 -0500
 Received: from pupman.pupman-dot-com (pupman-dot-com [199.45.150.249])
 	  by mrin57.mail.aol-dot-com (8.8.5/8.8.5/AOL-4.0.0)
 	  with ESMTP id AAA26132;
 	  Mon, 3 Nov 1997 00:50:21 -0500 (EST)
 Received: (from slist-at-localhost)
 	by pupman.pupman-dot-com (8.8.5/8.8.5) id WAA23668;
 	Sun, 2 Nov 1997 22:49:26 -0700
 Resent-Date: Sun, 2 Nov 1997 21:49:59 -0700
 Message-ID: <01BCE7E1.35543460-at-SA5399-3-27.stic-dot-net>
 To: "'Tesla List'" <tesla-at-poodle.pupman-dot-com>
 Subject: Re: Homemade stacked plate cap.  *Need* a vacuum pump?
 Date: Sun, 2 Nov 1997 22:31:07 -0600
 MIME-Version: 1.0
 Content-Type: text/plain; charset="us-ascii"
 Content-Transfer-Encoding: 7bit
 Approved: tesla-at-stic-dot-net
 Resent-Message-ID: <"eCc0d1.0.UU2.tVLNq"-at-poodle.pupman-dot-com>
 Resent-From: tesla-at-pupman-dot-com
 X-Mailing-List: <tesla-at-pupman-dot-com> archive/latest/2796
 X-Loop: tesla-at-pupman-dot-com
 Precedence: list
 Resent-Sender: tesla-request-at-pupman-dot-com
 From: Tesla List <tesla-at-pupman-dot-com>
 Original-From: Tesla List <tesla-at-stic-dot-net>
 
  >>