[Prev][Next][Index][Thread]

Re: Green PVC Pipe



Subject:  Re: Green PVC Pipe
  Date:   Tue, 20 May 1997 18:45:17 -0500
  From:   "Robert W. Stephens" <rwstephens-at-headwaters-dot-com>
    To:   Tesla List <tesla-at-pupman-dot-com>


> Date:          Mon, 19 May 1997 09:47:50 -0500
> To:            tesla-at-poodle.pupman-dot-com
> Subject:       Re: Green PVC Pipe
> From:          Tesla List <tesla-at-pupman-dot-com>

> Subject:  Re: Green PVC Pipe
>   Date:   Mon, 19 May 1997 04:17:35 -0700 (PDT)
>   From:   gweaver <gweaver-at-earthlink-dot-net>
>     To:   Tesla List <tesla-at-pupman-dot-com>
> 
> 
> At 11:58 PM 5/18/97 -0500, you wrote:
> >Subject:  Re: Green PVC Pipe
> >  Date:   Sun, 18 May 1997 20:38:54 -0500
> >  From:   "Robert W. Stephens" <rwstephens-at-headwaters-dot-com>
> >    To:   Tesla List <tesla-at-pupman-dot-com>
> >
> >
> >
> >> 
> >> 
> >> Does anyone have any experence with Green PVC pipe?  I know some PVC
> >> pipe is 
> >> conductive but don't know if Green will work for a TC secondary coil.  I
> >> am 
> >> planning a new secondary coil and have White PVC in 8.625" Dia. or Green
> >> PVC 
> >> in 10.625" Dia.  I plan to use this with my 16KW transformer.  
> >> 
> >> Gary Weaver
> >> 
> > 
> >Gary,
> >
> >Almost all of my TC secondaries from the small ones with 4.25 inch 
> >O.D., through the 10.5 inchers on the new twin system to the 15.5 
> >inch O.D. on my MTC (which developes 3X resonator length output) are 
> >all on green PVC pipe.  I'd say its AOK!
> >
> >rwstephens
> >
> >
> >
> What ratio did you use on your 10.5 and 15.5 secondary coils and what
> wire
> size did you wind them both with?  I am building a larger TC for my 16K
> transformer and am gathering information.  What mfd value are you using?
> What is your toroid and size? What did you use as a spark gap?  Is your
> primary flat? Whow much power are you running on these coils?  What is
> the
> output length maximum?
> Do you have any suggestions for improvements?
> 
> Gary Weaver
> 
 
You ask a lot of questions Grasshopper!  I'm sorry but I'm not in the 
business here of freely writing pages of instruction manual on how-to 
build a high performance coil every time somebody comes along and 
frequently asks. I just don't have the time.   

For a $2000.00  SASRAT (Self Addressed Stamped Return Airplane Ticket)
I'll 
do the instruction you request in person.

For $20.00 I'll mail you the plans you desire.

Learning from DR.RESONANCE and maybe soon I'll command my own private 
airplane and be closed 6 months of each year too,
rwstephens

P.S. I'm not trying to be a capitalist jerk, I'm just trying to keep up 
with the bill collectors.  If fellow Tesla coilers want to spend 
their dime to call me or visit I'm always happy to share experience,
knowledge
and ideas for free (or beer!). : )