Re: Core Material

• To: tesla-at-poodle.pupman-dot-com
• Subject: Re: Core Material
• From: Tesla List <tesla-at-stic-dot-net>
• Date: Sun, 04 May 1997 00:19:38 -0500
• Approved: tesla-at-stic-dot-net

Subject:  Re: Core Material
  Date:   Sat, 3 May 1997 13:35:34 +0500
  From:  "Alfred A. Skrocki" <alfred.skrocki-at-cybernetworking-dot-com>
    To:  Tesla List <tesla-at-pupman-dot-com>


On Thu, 1 May 1997 23:03:44 -0400 (EDT) SSNSanders-at-aol-dot-com

> I think you will have break out at the 1/4 wave area as well as the 1/2
> at top. Your coil will be breaking out about 1/2 the way up and at the top.
> The same goes for 3/4 and full wave. On a full wave it would break out at
> 1/4-1/2-3/4 and at top.  Stephen S.

This is true if you had a bottom feed 1/2 wave coil, but usually a 
1/2 wave coil is center feed which is realy a 1/4 wave dipole so 
there is minimum voltage at the middle of the coil and maximum 
voltage at each end of the coil.
 
                               Sincerely

                                \\\|///
                              \\  ~ ~  //
                               (  -at- -at-  )
                        -----o00o-(_)-o00o-----
                           Alfred A. Skrocki
                   alfred.skrocki-at-cybernetworking-dot-com
                             .ooo0   0ooo.
                        -----(   )---(   )-----
                              \ (     ) /
                               \_)   (_/

• Prev: RE: Plastic caps web page - not really
• Next: Re: 70 column lenght
• Index(es):
  • Main
  • Thread