-- BEGIN included message
- To: tesla-at-pupman-dot-com
- Subject: Re: Optimum coil configuration (fwd)
- From: "Robert W. Stephens" <rwstephens-at-headwaters-dot-com>
- Date: Wed, 12 Mar 1997 00:17:28 -0500
- Comments: Authenticated sender is <stephens-at-mail.headwaters-dot-com>
- Priority: normal
- Reply-To: rwstephens-at-headwaters-dot-com
> Date: Mon, 10 Mar 1997 21:40:39 -0700 (MST) > From: List owner <listown-at-poodle.pupman-dot-com> > To: tesla-at-poodle.pupman-dot-com > Subject: Optimum coil configuration (fwd) > > > ---------- Forwarded message ---------- > Date: Sun, 9 Mar 1997 12:45:12 -0700 > From: Stanley Harle <lazer-at-earth.wazoo-dot-com> > To: Tesla List <tesla-at-pupman-dot-com> > Subject: Optimum coil configuration (fwd) > > This is a forward of a message that I sent yesterday, but haven't seen > appear on the list. > > Hi y'all, > I have been operating the following setup for a while now. Because > of business trips, winter, laziness and various personal disasters, I > haven't gotten to do as much experimenting as I'd like. Lately, though I > find that I'm having a bit more time to play (and it's been warmer) > so I got to wondering about the consistently poor (in my view) performance > that I've gotten from my coil. > > The stats are: > 2 15-at-30 neons > around 50 feet of 3/8" copper, 3/8" apart for primary > Primary is sometimes inclined for better performance > a CP .025 uF capacitor > 6.5" X 27.25" secondary > various toroidal terminals > > The system usual tunes at about 8.25 turns or so. The best > performance to date has been about 22", from the largest toroid that I > have, about 30" X 3 made from drain duct for trailers. > Would I get better performance given the power limitations that I > have from a shorter secondary? > Would a shorter secondary cause the tuning to move to less turns > or more? > > > Stan Harle > Alamogordo, NM > Stan, Just glancing at your menu the obvious thing that appears is that your 0.025 mfd cap is way too large (by two and a half times) for your neons to swing. The biggest cap you should use on 60 mA -at-15 kV is about a 0.01 mfd. I actually employ a 0.007 mfd with this transformer size in a small coil and get terrific results. Good luck. rwstephens
-- END included message