[Fwd: Re: corona (fwd)]

• To: tesla-at-poodle.pupman-dot-com
• Subject: [Fwd: Re: corona (fwd)]
• From: Storey Clamp <storey-at-stic-dot-net>
• Date: Fri, 07 Mar 1997 02:45:03 -0600
• Approved: tesla-at-stic-dot-net

-- BEGIN included message

• To: tesla-at-pupman-dot-com
• Subject: Re: corona (fwd)
• From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz>
• Date: Wed, 5 Mar 1997 09:46:15 +1200
• Organization: Wellington Polytechnic, NZ
• Priority: normal

Hi Dave,
          What is you primary capacitance, and what is the maximum 
straight-line spark you have measured from the unit please?

Malcolm

> Date: Mon, 03 Mar 1997 15:01:47 -0700
> From: Dave Burman <dburman-at-ix-dot-netcom-dot-com>
> To: Tesla List <tesla-at-poodle.pupman-dot-com>
> Subject: corona
> 
<snip>
> 
> My coil configuration is as follows:
> 
> 2 15kva neons
> 2 air wound and 2 ferrite core chokes
> copper tube vacuum quenched spark gap (8 tubes, .030 spacing)
> Primary -1/4" copper pipe with 3/8" spacing 12 turns
> Secondary - 6" acrylic wound with 22" of 24ga magnet wire
> Torroid - 4" dryer duct around a 24" pizza pan
> ground - very heavy welding cable (1/2" dia) connected to 1 8' copper
> plated ground rod
> 
> 

-- END included message

• Prev: Re: Just a brush]
• Next: [Re: Just a brush]
• Index(es):
  • Main
  • Thread