plywood capacitor box

• To: "'Tesla List'" <tesla-at-poodle.pupman-dot-com>
• Subject: plywood capacitor box
• From: Tesla List <tesla-at-stic-dot-net>
• Date: Fri, 11 Jul 1997 16:53:06 -0500
• Approved: tesla-at-stic-dot-net

From: 	Michael Smith[SMTP:md.smith-at-usa-dot-net]
Reply To: 	md.smith-at-usa-dot-net
Sent: 	Friday, July 11, 1997 3:07 PM
To: 	tesla list
Subject: 	plywood capacitor box

greetings all, 

Nice to see the list up and working again...The shakes are
starting to go away now.

I have a quick question. Can anyone recommend a very good and
relatively inexpensive coating, like a two part epoxy paint or
something that would be able to seal up the inside of a plywood
box used to a capacitor case? I would like to avoid building a
plastic box if I can. 

I would like to use several coats of polyurethane, then coat the
inside with something to hold in the oil. 

Anyone have any experience along these lines?

Michael Smith
md.smith-at-usa-dot-net

• Prev: Thanks
• Next: Re: help with a different type of coil
• Index(es):
  • Main
  • Thread