[Prev][Next][Index][Thread]
Very COOL AVI
I put an AVI of my coil blasting sparks at a movie screen from an arrow tip
placed at the base os the sphere up on my web site. I would send it here
but it is not to small, it is worth it to see what happens to the movie
screen, the color of the sparks on the screen is also interesting. I think
it is worth the wait to see it, let me know if anyone has tried this before
please. I edited the avi for length, I took out the empty shots because I
pulsed the power to the coil.
NOTE: Notice the RFI in the camera, both the camera and computer are in the
same room as the coil { Y e O w }, this will give you an idea of the RFI my
coil produces. Pulsing the power to the coil is the only I can keep the
computer from locking up, short blasts are ok but long durations seem to
affect the mouse and video in bad ways.
Another point is this is only at 90VAC on the variac, higher voltages also
seem to mess up the computer. After I put the new gaps in the RFI is way
down from where it was before, I could not even think of operating the
computer with the old gaps. Still I have the capacitors shunt across the
transformer and gaps in series, I put a safety gap across the HV secondary
outputs as to not blow them, I hope.
The distance from the arrow tip to the movie screen is 15 inches, the only
way to get the sphere to break out is with a point somewhere on it. If there
is nothing placed on the sphere I get sparks out the top winding going to
the terminal.
Regards,
Kevin Nardelle
********************************************
* T E S L A C O I L S *
********************************************
Kevin Nardelle knardell-at-accesscom-dot-net
My main web page IS UP all TESLA
related with lotsa pictures and links.
http://www.icorp-dot-net/users/kev/tesla
http://www.accesscom-dot-net/nardell
Non related sites I have
The Louisiana Swamps Online (Under construction)
http://www.icorp-dot-net/users/kev
**********************************************