[Prev][Next][Index][Thread]
Re: Kirlian photography
> >All,
> >
> >I would like to make Kirlian photographs but what do I need to do
> >them?
> >
> Tero,
> You need a high voltage RF supply, an object to be
> photographed and sheet photographic film. Note: "a high voltage RF
> supple" means that to the rest of the known world;) On this LIST, read
> that as: a medium voltage high audio frequency source;) Say, 15kV -at-
> 15+kHz. Use a royer oscillator driving a Television flyback
> transformer for the HV ;) source.
Can I use 12V car ignition coil? I would also like to have schematic
for royer oscillator. .
> Put the object of interest on the photo film, attach the HV lead to the object.
> Turn on the HV. ( you will have to experiment with the ON time) Develop the
> film. It's easiest if you use a dark room for these steps.
But what if I want to have Kirlian photograph on my hand? I can't
connect HV lead to my hand :)
> p.s. Thank you for the fine Tube Coil site.
Thank you, and all, for visiting.
Regards,
Tero Ranta
Vacuum Tube Tesla Coil Page:
http://www.icenet.fi/~dixie/