Re: Stand off insulators

To: tesla-at-pupman-dot-com
Subject: Re: Stand off insulators
From: Jim & Dala Florey <beagle-at-prairie.lakes-dot-com>
Date: Tue, 11 Feb 1997 02:05:59 GMT
Subscriber: beagle-at-prairie.lakes-dot-com Tue Feb 11 22:37:21 1997

At 10:25 PM 2/10/97 -0700, you wrote:
>> Subject: Stand off insulators
>
>Subscriber: whipit-at-cruzio-dot-com Mon Feb 10 22:06:43 1997
>Date: Sat, 08 Feb 1997 12:36:17 -0800
>From: Whipit <whipit-at-cruzio-dot-com>
>To: tesla-at-pupman-dot-com
>Subject: Re: Stand off insulators
>
>Tesla List wrote:
>> 
>> Subscriber: SSNSanders-at-aol-dot-com Fri Feb  7 22:52:16 1997
>> Date: Fri, 7 Feb 1997 04:38:45 -0500 (EST)
>> From: SSNSanders-at-aol-dot-com
>> To: Tesla-at-pupman-dot-com
>> Subject: Stand off insulators
>> 
>> Any of you gentelmen have wifes that are into ceramics? 
>>   Stephen Sanders
>> snp.
>
>I am half owner of a kiln with a sculptor friend of mine.  I would be into 
>producing custom insulators if someone can come up with a form to cast off
of.  I 
>can handle simple cylinders, but I do not have a lathe to turn custom
shapes.  Most 
>any existing hard form could be adapted.  An existing insulator could be
copied as 
>well, but I suspect that that may be a patent violation.  Are there any
specific 
>types of porcelain and glaze that are better suited for or made
specifically for 
>this application?  Fancy colors? :)
>
>Mark Napier
>
>

I would be interested in making forms. I have a lathe and could mail you
them when completed.
 
Jim Florey Jr
Mankato, Mn.