[Prev][Next][Index][Thread]

Re: flat caps




>
>What size plates do i need for a roll cap with 30 mil polyethylene
>
>and aluminum flashing at .01 uf?
>
>
>
>                       Darren Haley
>

There are good plans for building you own caps on Bill Beaty's Web-page.
It's at "www.eskimo-dot-com/~billb/tesla".  There is also alot of other good
info there, so take your time and look around a bit.




Kerry "Kilroy" Ludwig
Kilroy-at-bscn-dot-com