Re: Gluing Polystyrene

• To: tesla-at-pupman-dot-com
• Subject: Re: Gluing Polystyrene
• From: Skip Greiner <sgreiner-at-mail.wwnet-dot-com>
• Date: Thu, 06 Feb 1997 20:38:00 -0800
• Subscriber: sgreiner-at-mail.wwnet-dot-com Fri Feb 7 00:39:21 1997

Tesla List wrote:
> 
> Subscriber: MALCOLM-at-directorate.wnp.ac.nz Wed Feb  5 22:35:44 1997
> Date: Wed, 5 Feb 1997 15:55:14 +1200
> From: Malcolm Watts <MALCOLM-at-directorate.wnp.ac.nz>
> To: tesla-at-pupman-dot-com
> Subject: Gluing Polystyrene
> 
> Hi all,
>          Help requested please. All ideas on how and what to use
> gratefully received. I have access to a stack of foam at the mo
> and plan to make some discharge terminals (not CW ;)
> 
> Malcolm
> 
> [ For solid (not foam) ps, use methelyne chloride or model airplane glue.
>   For foam, good old elmer's glue is excellent.  -- Chip ]


There is also a contact adhesive available for the foam or solid which
has methelyne chloride in it.

Skip

• Prev: Re: Museum Coil Revisited
• Next: transformer lamination
• Index(es):
  • Main
  • Thread