Re: Newborn coil - will be twins (fwd)

• To: tesla-at-pupman-dot-com
• Subject: Re: Newborn coil - will be twins (fwd)
• From: Tesla List <mod1-at-pupman-dot-com>
• Date: Thu, 27 Feb 1997 21:01:03 -0700 (MST)
• Approved: mod1-at-poodle.pupman-dot-com

---------- Forwarded message ----------
Date: Thu, 27 Feb 1997 12:58:50 -0500 (EST)
From: Esondrmn-at-aol-dot-com
To: tesla-at-pupman-dot-com
Subject: Re: Newborn coil - will be twins (fwd)

In a message dated 97-02-27 05:01:19 EST, you write:

- snip-

<< 
 The secondaries will both be wound in identical sense.  The flat 
 spiral primaries will be opposites (mirror images) of each other to 
 facilitate symmetrical connection to the 3/4 inch copper pipe 
 parallel transmission line running between the two towers.  Thusly 
 the desired 180 degree phase difference atop the two towers will be 
 achieved.
 
 I plan to kluge it together employing a rotary break, capacitor and 
 transformer borrowed from another system in order to speed up the 
 evaluation process of system capability, and better determine actual power 
 requirements of the completed system in its destined venue.  A proper 
 sized power supply will then be constructed.
 
 If I am as lucky with this system as I have been in the past with 
 single tower classical systems, then this system should really cook.
 
 I will keep y'all posted of results as available and will eventually 
 post photos on funet.
 
 Cheers,
 rwstephens
  >>
rwstephens,

How do you connect the primaries in this system?  Are both primaries in
series?  With one capacitor?  And one gap?

Ed Sonderman

• Prev: Re: Why does top capacitance work? (fwd)
• Next: Re: Choke making idea (maybe) (fwd)
• Index(es):
  • Main
  • Thread