Need Answers ASAP!

From: 	Zuma[SMTP:mwise-at-ns.sosis-dot-com]
Reply To: 	mwise-at-ns.sosis-dot-com
Sent: 	Sunday, December 21, 1997 10:21 PM
To: 	tesla-at-pupman-dot-com
Subject: 	Need Answers ASAP!

Two quick questions. I recently unpotted a 15000-at-30ma neon tranny.
I was wondering, I am considering raising the ma rating to about 
35ma to 40ma, do the shunts have to be up next to the primary or
secondary after I remove the desired amount. Second question,
I took the core and coils apart and cleaned them then I put them
back together and it ran perfect. Later I had to take it apart again
and I put it back together exactly the same. It works the same as it
did after the first time I took it apart. But now here's my question.
Now the tranny buzzes kind of loud. I think it is probably loose,
because if I set it on its side the buzzing almost totally stops.
Am I on the right track or is something out of whack!