Re: Cap bottom !

• To: "'Tesla List'" <tesla-at-poodle.pupman-dot-com>
• Subject: Re: Cap bottom !
• From: Tesla List <tesla-at-stic-dot-net>
• Date: Mon, 25 Aug 1997 22:50:26 -0500
• Approved: tesla-at-stic-dot-net

From: 	Jim Fosse[SMTP:jim.fosse-at-bjt-dot-net]
Reply To: 	jim.fosse-at-bjt-dot-net
Sent: 	Monday, August 25, 1997 8:49 PM
To: 	Tesla List
Subject: 	Re: Cap bottom !

>From: 	Peter Electric[SMTP:elekessy-at-macquarie.matra-dot-com.au]
>Reply To: 	elekessy-at-macquarie.matra-dot-com.au
>Sent: 	Sunday, August 24, 1997 3:54 AM
>To: 	Tesla List
>Subject: 	Re: Cap bottom !
>

>Try a Hot melt glue gun. I make all my tops out of plexiglass and glue
>them on with this stuff and it works a treat. You can also get it apart
>again by heating with a hot air gun.
>
>Cheers,
>
Peter E.

	Hot glue works well until you start using transformer oil. (At
least Shell Diax-al). Transformer oil dissolves the hot glue in a few
days.

	I use epoxy glue for the bottom end cap and hot glue, which is
above the oil level, for the top end cap.

	Regards,

	jim

• Prev: Re: surge impedance ?
• Next: Re: transformers
• Index(es):
  • Main
  • Thread