Neon Transformer Connections

• To: tesla-at-poodle.pupman-dot-com
• Subject: Neon Transformer Connections
• From: Tesla List <tesla-at-stic-dot-net>
• Date: Sat, 12 Apr 1997 07:41:04 -0500
• Approved: tesla-at-stic-dot-net

Subject: 
        Neon Transformer Connections
  Date: 
        Mon, 21 Apr 1997 18:49:36 -0400
  From: 
        Corey Edmunds <corey-at-efni-dot-com>
    To: 
        tesla-at-pupman-dot-com


Hi Everyone..

I just purchased a neon transformer today and I am wondering what the
connections are for..  I assume that the 2 heavily insulated bolts near
the top far sides are the high-voltage output, the two bolts 1" apart on
the bottom side is the 120v input and the bottom screw in the corner
with the bit of uninsulated copper wire is the ground connection.  Is
this correct??  Also, would it harm the transformer if I made a small
jakobs ladder with the high-v output 'till I make my coil? 
Thanks
        Corey Edmunds

• Prev: Re: K Factor & Mutual Inductance
• Next: Re: glass vacume gaps
• Index(es):
  • Main
  • Thread