Re: glass laminate - Bah, Humbug...

• To: tesla-at-poodle.pupman-dot-com
• Subject: Re: glass laminate - Bah, Humbug...
• From: Tesla List <tesla-at-stic-dot-net>
• Date: Fri, 04 Apr 1997 01:47:08 -0600
• Approved: tesla-at-stic-dot-net

Subject: 
           Re: glass laminate - Bah, Humbug...
      Date: 
           Fri, 04 Apr 1997 00:19:30 GMT
      From: 
           jim.fosse-at-bdt-dot-com (Jim Fosse)
        To: 
           Tesla List <tesla-at-pupman-dot-com>
References: 
           1


>  From: 
>        "Daryl P. Dacko" <mycrump-at-cris-dot-com>
>    To: 
>        Tesla List <tesla-at-pupman-dot-com>
>
>

>I'm thinking about trying a 'hot' rotor design, using a ten inch
>in diameter, one inch thick aluminum plate, mounted on bearings 
>attached to some one inch thick lexan supports. 
>
>I'm planning to use some thick walled rubber hose with a plastic
>rod in the center as an insulated flexable coupling.
>

>
>Does anyone have a cure for "Tesla Fever" ?
>
Daryl,
        Any tubing that is black is conductive due to the carbon black
used for UV protection. Use some clear thick walled polyethylene or
vinyl water tubing.

        jim

• Prev: Re: Twintastic first light
• Next: Re: Final test on new TC (fwd)
• Index(es):
  • Main
  • Thread