[Prev][Next][Index][Thread]
Re: A few questions
On Thu, 10 Oct 1996, Tesla List <tesla-at-poodle.pupman-dot-com> wrote:
>>From jim.fosse-at-bdt-dot-comThu Oct 10 22:37:10 1996
>Date: Thu, 10 Oct 1996 22:01:55 GMT
>From: Jim Fosse <jim.fosse-at-bdt-dot-com>
>To: tesla-at-pupman-dot-com
>Subject: Re: A few questions
>
>
>>Date: Wed, 9 Oct 1996 07:16:30 -0400 (EDT)
>>From: dll-at-egg-rb-dot-com
>>To: tesla-at-pupman-dot-com
>>Subject: Re: A few questions
>>
>>Richard
>>
>>I read some time ago that you had perfected a
>>fixed electrode spark gap that is built inside
>>a PVC tube with forced air blowing through it.
>>Could you send me a copy of the design? I would
>>like to try it with my coil.
>>
>Dave,
> Just out of curiosity what type of gap are you using? I was
>thinking of the wide range of HV switches that EG&G makes.
>
>Also, do you have a Gamma for Copper?
>
> Regards,
>
> jim
>
>
I am using a modified OGP-15 gap filled with hydrogen
that I rescued from the scrap heap. I'm only guessing
at the actual part number because it was an engineering
device, and it was't marked.