[Prev][Next][Index][Thread]
Formula Overload or (drowning in math)
Help! I'm Confused!!
After reading and sorting through lots of messages from this group and
the usa-tesla group, and information that I have gathered from
ftp://ftp.funet.fi/pub/sci/electrical/tesla/, I am confused. The
formulas that Bert Pool gave and some of the tables that Richard Quick
gave for the resonant frequency of the secondary come out very
different. I assume I am doing something wrong when doing the
calculations or I'm missreading what the formulas are for.
Since I have been having a bit of trouble getting my hands on used neon
xformers ( was able to get a 12kv 30ma so far), the power supply is
still up in the air, but I am still aiming for an output of around 12 to
15kv at 120ma. If I have read correctly, the primary of the Tesla coil
would best be made from copper tubing of the inverted conical shape. A
secondary coil of around 6 to 8 inches diameter, a couple of feet high,
with Mr. Donut on the top. I would love to get one of the commercially
made capacitors but by the time I could get it to Canada it would be
very pricey, so thats still up in the air also.