[Prev][Next][Index][Thread]

Re: acrylic glueing



tesla-at-grendel.objinc-dot-com On Mon, 18 Mar 1996 08:32:00 +0700, you
wrote:


>Subject: acrylic glueing
>
>I am now working with acrylic on my formless coil. I recall someone talking
>of cracks forming when glueing acrylic. Could someone refresh me on that so I
>do not repeat the same mistakes.
>I would also like to ask why do you need to seal the tube at the ends?
>
>    Kevin M. Conkey
>
>P.S.
> This acrylic potting compound I am using is great! (Castolite AP
>Acrylic-Polyester casting plastic) Very hard, strong, and beautifully clear.
>I tried a 2nd coil and found out that it accepts several coats if you wished
>an extreamly thick coil.
>
>
Kevin,
	If you have got some of it left over, make a small plate of it
on some saran wrap or polyethylene and use that plate as a test
subject.

	jim