[Prev][Next][Index][Thread]
Re: Blown Rolled "Hull" Capacitor Discussion
-
To: tesla-at-grendel.objinc-dot-com
-
Subject: Re: Blown Rolled "Hull" Capacitor Discussion
-
From: jim.fosse-at-bdt-dot-com (Jim Fosse)
-
Date: Mon, 25 Mar 1996 04:22:09 GMT
-
>Received: from bdt.bdt-dot-com (root-at-bdt-dot-com [140.174.173.10]) by uucp-1.csn-dot-net (8.6.12/8.6.12) with SMTP id VAA21492 for <tesla-at-grendel.objinc-dot-com>; Sun, 24 Mar 1996 21:22:31 -0700
I just blew my second cap:(
It was 3 layers of 0.030" polyethylene between 14" by 93" Al flashing.
The rolled assembly appears to have settled in the container and the
Al flashing is now resting on the plexiglass support leaving only a
few mills of clearance between the plates.
Does anyone have any suggestions on cleaning off t he transformer oil
and trying to reroll it? Any thoughts would be appreciated.
bummed out
jim