[Prev][Next][Index][Thread]
Re: Rectifying Tesla Output
-
To: tesla-at-grendel.objinc-dot-com
-
Subject: Re: Rectifying Tesla Output
-
From: nikki-at-fastlane-dot-net (Bert Pool)
-
Date: Fri, 08 Mar 1996 17:51:43 -0500
-
>Received: from fastlane-dot-net (fastlane-dot-net [204.251.16.10]) by uucp-1.csn-dot-net (8.6.12/8.6.12) with ESMTP id QAA24529 for <tesla-at-grendel.objinc-dot-com>; Fri, 8 Mar 1996 16:49:42 -0700
>>From bboettje-at-su102s.ess.harris-dot-com Fri Mar 8 12:14 MST 1996
>>Received: from ess.harris-dot-com (su15a.ess.harris-dot-com [130.41.1.251]) by
uucp-1.csn-dot-net (8.6.12/8.6.12) with SMTP id MAA09954 for <tesla-at-objinc-dot-com>;
Fri, 8 Mar 1996 12:01:10 -0700
>Date: Fri, 8 Mar 1996 14:01:01 -0500
>From: bboettje-at-su102s.ess.harris-dot-com (Bruce Boettjer)
>To: tesla-at-objinc-dot-com
>Subject: Rectifying Tesla Output
>
>Hi All,
>
>How would one go about rectifying the output of a tesla coil? I know there
are doides out there; however, I can not afford $400 a pop... Is there an
easier way?
>
>Thanks,
>
>Bruce
>
>
Bruce, probably the best reference I can point you to on rectifying Tesla
coil outputs is to get a copy of "Electric Spacecraft Journal", Issue # 3,
January 28, 1992, pp 6 thru 17. Ron Kovak published a very good article on
Tesla's longitudinal ground wave generator at Colorado Springs and describes
some rectification experiments that Ron did with a Tesla coil.
Send me your snail mail address and I'll mail you a copy of the article.
Bert