[Prev][Next][Index][Thread]
Re: Blown Rolled "Hull" Capacitor Discussion
-
To: tesla-at-grendel.objinc-dot-com
-
Subject: Re: Blown Rolled "Hull" Capacitor Discussion
-
From: napier-at-cats.ucsc.edu (Lisa Napier)
-
Date: Wed, 28 Feb 96 18:49:30 EST
-
>Received: from cats.ucsc.edu (pop-at-cats-po-1.UCSC.EDU [128.114.129.22]) by uucp-1.csn-dot-net (8.6.12/8.6.12) with ESMTP id TAA27184 for <tesla-at-grendel.objinc-dot-com>; Wed, 28 Feb 1996 19:40:32 -0700
On Wed, 28 Feb 1996 13:00:54 +0700 you wrote:
>After listening to this discussion, one thing has crossed my mind.
>Has everyone that has blown these caps used a vacuum pump to remove
>ALL air from between the plates and in the oil? Also, is everyone
>using transformer oil? I have heard talk of cleanliness, which is
>indeed important. But the two point I bring up are also critical.
>
>For those that have blown the rolled "Hull" capacitors recently, I
>would like to take a survey to see if the above 2 details were
>followed.
Scott, I did not pump either one of my caps down and they are both in
mineral oil.
Mark
Mark R. Napier
napier-at-cats.ucsc.edu